Adjustment screws. Every sextant is equipped with error adjustment screws. The design of these screws varies from sextant to sextant. Some have ordinary screw driver slots while others have round heads with a hole drilled through it. The first requires the use of a suitable screw driver whilst the others…
Reading the sextant is very simple: Degrees are read directly from the graduated arc opposite the index mark on the index arm. Minutes are read from the micrometer drum opposite the vernier index mark. Seconds are read from the vernier where one of the vernier graduations lines up with one…
Before housing the sextant in its case, set the index arm to the middle of the graduated arc and turn all the shades inwards (ie towards the centre of the instrument). Place the sextant carefully in the box ensuring that the three legs at the rear of the instrument enter…
Depending on type and manufacturer, the sextant case will either be made of a hardwood or plastic. The wooden cases are fitted with a carrying handle, patent fasteners, lock and key. Inside the case are wooden chocks built to prevent the sextant being dislodged. The plastic case does not have…
The sextant is made up of the following parts: The frame. The handle. The telescope or monocle. The rising piece. The arc. The index arm. The clamp. The worm and rack. The micrometer drum. The micrometervernier. Electric light. The index mirror. The index mirror clips. The index mirror (first) adjustment…
Although the marine sextant is seldom used these days due to the introduction of satellite navigation systems (ie GPS), it still can be used for the following: Measuring the altitude of the stars, sun, moon and planets in order to determine geographical position out of sight of land (ocean navigation).…
